FORGOT YOUR DETAILS?

Internal Connection
Fast and Easy Installation
Indoor & Outdoor
Indoor P1.9, P2.6, P2.9, P3.2, P3.9, P4.8
Outdoor P2.6, P3.2, P3.9, P4.8, P6.25
Diecast Aluminum
Professional Rental

Maximus - RS Diecast Rental Series

This Series can also be used for fixed installation Solutions

NR1 Rental

RS Diecast Rental Series

This Series can also be used for fixed installation Solutions

RS1 Indoor

Used for Indoor Rental
Also used for Fixed Installation
Full black SMD

  • P1.9, P2.6, P3.2, P3.9, P4.8, P6.25
  • Magnetic Modules
  • Black Face SMD
  • No Fan Needed
  • High Contrast
  • Dust Proof
  • No Ghost Effect
  • High Uniformity
  • Big Viewing Angle
  • Fireproof Materials
  • Fast Repair
  • Fast Install
  • Backup Receiving
  • Extremely Flat

RS2 Outdoor

Used for Outdoor environment
Can also be used for indoor
High Brightness Waterproof

  • P2.6, P3.2, P3.9, P4.8, P6.25
  • Magnetic Modules
  • UV Proof
  • No Fan Needed
  • High Brightness
  • Waterproof IP65
  • No Ghost Effect
  • High Uniformity
  • Big Viewing Angle
  • Fireproof Materials
  • Fast Repair
  • Fast Install
  • Backup Receiving
  • Extremely Flat

RS3 Indoor
High Brightness

Indoor where higher brightness is needed.
Can attract more attention to the display

  • P2.6, P3.2, P3.9, P4.8, P6.25
  • Magnetic Modules
  • UV Proof
  • No Fan Needed
  • High Brightness
  • Dust Proof
  • No Ghost Effect
  • High Uniformity
  • Big Viewing Angle
  • Fireproof Materials
  • Fast Repair
  • Fast Install
  • Backup Receiving
  • Extremely Flat

Front Service

Led Modules Power Supply & Hub

Back Service

No screw remove power supply and receiving card

Cable Free Connector Turn ON

16 Pin = 8 pin Signal + 8 pin Backup signal

Cable Free Connector Turn OFF

16 Pin = 8 pin Signal + 8 Pin Backup Signal

Rocketsign P2.6 is world`s outdoor smallest pitch This year will be the year of P3.9 OUTDOOR with TUV EMC certificate

RC series can be used for fixed installation and for rental solutions

EFFICIENTLY RE-ENGINEER
MAXIMUS NEW Rental Cabinet

Less Heat - Mechanical Cooled without FAN
Magnetic Modules with calibration memory - front service
MAXIMUS II outdoor - IP65 front and back IP55
Dual Receiving Card for

Mok KeithRocketsign
Check our new specification of the RC series. We improved all the necessary things so the customer does not even need to mention it. Our product pass EMC, TUV, ETL...

Maximus - RS ONE person install

Using Mechanical Hook system which only one person is needed for install.
<10 seconds to install the panes. It takes about 10 seconds to uninstall a each panel.

MAXIMUS I - (RS1) Specification



MAXIMUS II - (RS2) Specification



MAXIMUS III - (RS3) Specification



Side Lock

Strong Fast Sidelocks
5 seconds to install each lock
Adjustable for tolerance to remove gaps

Breathing Module

IP65 with Breathing for RC2
Handle for back service
Safety Cable for Magnetic Modules

Test Button

Test Button
Led inside Test Button for Signal
Test before install

Connector

IP65 Connector for RC2
Nuetric IP65 Connector
Reunion IP65 Connector

Power Indicator

Indicate Power
Can be switched off
White Led inside

Doorlock

2x Door Lock
Fast and Easy Maintenance
No screw needed to do maintenance

Compare

  • HD Outdoor Ready
  • Diecast Aluminum
  • ALL Modules Compatible
  • Side Locks
  • Test Button
  • Triangle Power Indicator
  • Magnetic Led Modules
  • Front / Back Service Led Modules
  • Service Power Supply / Receiving
  • Signal Power Connectors
  • LCD Indicator
  • M.U.S Technology
    Metric Unit System Technology
  • No more AB Led Modules
  • Led Calibration Data
  • Full Front Maintenance

MECANUS

  • YES
  • YES
  • YES
  • 3 x Sidelocks
  • YES
  • YES
  • YES
  • YES
  • ONLY from BACK
  • Reunion, Seetronic, Nuetric
  • NO
  • YES
  • NO AB Modules
    All Modules are the same, no left right modules. Although you need to change the protection lit.
  • Calibration memory in Modules
  • NO, only Modules

MAXIMUS

  • YES
  • YES
  • YES
  • 4 x Sidelocks
  • YES (below LCD)
  • Yes Intelligent Indicator
  • YES
  • YES
  • Front or Back
  • Internal Connector
    Nuetric, Reunion, Seetronic Can be optional
  • NO
  • YES
  • NO AB Modules
  • Calibration memory in Modules
  • YES

Power Triangle

Power Triangle

Power Triangle will give indication of the display if it has power with white light.

Optional is to get a more power indicator with error detection for:

weak power supplies, no signal, door is open, temperature is to high which will change the color of the triangle.

Front Service

Front Service Tool

MAXIMUS can use a special tool for front service.
Pitch of P4.8 and higher are using a front service screw tool.
All smaller pitch can use a magnetic tool that can pull the led module out.
This also works for outdoor waterproof solutions.

Stacking Beam

Stacking Bar

The hanging bar can be used also as a stacking bar. Made of aluminum profile which is very strong and precise with less tolerance compared to most material. Also stacking equipment can be delivered to final your solution.

Back Service

Back Service

MAXIMUS series is using magnetic modules for indoor and for outdoor.
It is possible to push to module out from the back and also get the module from the back.
Each module have a handle which is very convenient.
Once person is enough to service the display. No more screws needed.

Black SMD

Black SMD

White SMD can be more bright but with our technology we can make it happen that black smd (black face) can give much more contrast.

For small pitch outdoor the black face will look much better compared to white face. But it is not all the pitch that we can handle this.

Price of black face SMD is also more expensive. And please do not get confused by competition when they say black smd it might be black border and not black face smd. Black border is a standard SMD.

 

Hanging Beam

Hanging Beam

Hanging bar is made of aluminum profile which is extremely strong and precise. The common problems you will not have compared to the steel plated bars. Also we have a special truss hook which makes the solution extremely nice with a locking system for the bars. You can install the screen directly on the bars without aligning it.

Back Maintenance

Back Maintenance

The power supply and the receiving card can also be removed from the back.
A door can be opened and the power supply is attached with 4 screws with fast changing connectors.
Also the receiving card is easy to change with a few screws.

Front Maintenance

Front Maintenance

Once the led modules are removed with a tool. You can remove the front service plate. The power supply, hub and receiving card are also already connected to the plate.
This will give you brand new solutions. When you use the display as a fixed installation you can fully do front service without space on the back. Very convenient.

Module Protect

Module Protect

When you put the cabinet on the ground it lifts up the led modules to protect it. This will protect the display from being damaged.

Fast Pin Lock

Fast Lock

Fast Lock pins are added to the product. Which makes it possible to install the display just by one person.
The fast lock pins are a better alternative for modules since it is much more safe.
You can install the display just by yourself without help from others.
This will save you much time.

Wireless Connector

Wireless Connector

No more cables on the outside. It is possible to connect the power and signal between the cabinet with a special designed connector.
The cables are connected from the top or bottom of the hanging bar or stacking beam. It is also possible to connect with normal Nuetric or Reunion connectors.

Frequently Asked Question

MAXIMUS is the new rental series we prepare for the year 2016, it is the high-end brother of MECANUS.
It uses 4 sidelock instead of 3 which can improve the precesion. Also the display use full front service which also count for the power supply and the receiving card. For MECANUS the service is front for the modules and back for the power supply and receiving card.
The biggest difference is that MAXIMUS also equip internal connector between the displays. Which is fast and easy to connect the displays together without visible cables from outside.
Also MAXIMUS is made so that one person can fully install the screen using the fast fixing lock. Which is a very important feature when you work alone and is also a more safe solution compared to Magnet.

Yes, but also depends on the environment. If you use an RS2 Outdoor screen and put it indoor,  you need to be sure that the environment temperature is not to high. Please also let us know how you would use the screen in fixed installations so we can consult you with the best solution possible. RS series have the possible for full front or back maintenance depends on your led screen solution

Standard the displays do not really need to used the connectors from outside. Since it got the function to connect the displays intern. With a turn button you can connect the displays. The displays are also suitable for using it with  Reunion connectors which is a very stable and good brand which we have very good experience with. Also the pricing is much lower compared to Nuetric. Anyway it is possible to use , Nuetric One, Reunion, Seetronic or other connector as you wish.

But yes the display can perfectly use Nuetric Blue Indoor connectors and Nuetric Yellow Outdoor Connectors.

Yes, there is a switch on the hub can put off the triangle light so it would not interfere.

We tested the displays in an environment of 65degree when the display was max brightness and all leds on.
The product passed the test without any. The led display of  RS2 series is mechanically cooled.

The power supply got an cool pad and use the aluminum mechanical door to cool it. The modules have special design. A mechanical labyrinth is added on the back of the modules so that the module can breath.

 

The difference between us and other company is that we also own a plastic moulding factory and manufacture our own plastic parts which means also the mask and the bottom plastic of the modules. The secret of small pitch outdoor all lies in this part. Tolerance is not accepted which means the parts must fit perfectly.

Another secret is that we have to

add a silicon layer getween the leds. This process needs a lot of experience and the right machinery to apply on.
If the silicon get a little bit higher the display will show ugly deformation
Compared to some competition we all use a plastic mask so all thesilicon is hided below the mask. This will finnish the product and protect leds.
When we finish the display the uniformity is extremly important. Since it is an HD outdoor display people are getting very close to the display and will not accept deformation.
It might look very easy but it is actually quiet difficult to achieve.
Another thing is the viewing angle which must be perfect 140x140 degrees.
All these together is the key to achieve an high quality displays which is the reason why competition without experience will fail to make it.
It took us many years to achieve and to be NR1 on the market for small pitch outdoor. And we finally achieved it for over 2 years still unbeatable and going even more far.
And the last thing is that we thank all the proffessional customers that helped us with their ideas to make this come true.

 

 

Yes the led modules are all compatible with eachother.
It is possible to buy the cabinets seperately and ship them by boat and ship the modules later on by air.
Which also give a solution for stocking the cabinets and having the led modules in about 2 weeks.
Be aware that if you use this solution you tell us about it. Since the cabinets needs a higher Watt of power supply so that works with all different kind of modules.
Another thing, it should be best that you buy OUTDOOR cabinets so it works indoor and outdoor to be waterproof.
Ofcourse take in account when you use indoor modules on an outdoor cabinet it can not be used outdoor.
If you buy indoor cabinets it would not be a good idea to install outdoor modules on it.
Modules are made from magnetic so very easy to install.

First of all easy to change the module. Which you can also get the module out from the back.
Optional front service is also possible but please update us when you want that solution.

What is also possible it when you separate the cabinet and module the customs tax can be lower since it will use another custom code.  So it could be perfectly possible to address your company as manufacture of the display.

 

 

Yes, the RED, PURPLE, BLUE color on the back can be changed to a color that you prefer. Mostly we sell the FULL black with  white power triangle. But the power triangle can also be black.

 

 

 

TOP