Rocketsign Led Display Manufacturing
+86 755 2885 8058
Email: sales@rksign.com
Rocketsign
Building 44 Fuming Industrial Zone Pinghu Street Longgang, Shenzhen, China
Rental
RM1 Indoor
Used for Indoor Rental
Also used for Fixed Installation
Full black SMD
- P2.97, P3.9, P4.8
- Magnetic Modules
- Black Face SMD
- No Fan Needed
- High Contrast
- Dust Proof
- No Ghost Effect
- High Uniformity
- Big Viewing Angle
- Fireproof Materials
- Fast Repair
- Fast Install
- Extremely Flat
RM2 Outdoor
Used for Outdoor environment
Can also be used for indoor
High Brightness Waterproof
- P3.9, P4.8, P6.25
- UV Proof
- No Fan Needed
- High Brightness
- Waterproof IP65 Front IP55 Back
- No Ghost Effect
- High Uniformity
- Big Viewing Angle
- Fireproof Materials
- Fast Repair
- Fast Install
- Backup Receiving
- Extremely Flat
RM3 Indoor
High Brightness
Indoor where higher brightness is needed.
Can attract more attention to the display
- P2.97, P3.9, P4.8, P6.25
- Magnetic Modules
- UV Proof
- No Fan Needed
- High Brightness
- Dust Proof
- No Ghost Effect
- High Uniformity
- Big Viewing Angle
- Fireproof Materials
- Fast Repair
- Fast Install
- Backup Receiving
- Extremely Flat
Front Service
Led Modules Power Supply & Hub
Back Service
No screw remove power supply and receiving card
Rocketsign Magnesium is a strong light weight rental solution The 500x1000mm can achieve new possebilities for fast installation
RC series can be used for fixed installation and for rental solutions
Mok KeithRocketsign
This product is more economic since it is bigger, and also less weight compared to our other rental products. Build up will be more fast with bigger panels.
MAGNESIUM I - (RM1) Specification
MAGNESIUM II - (RM2) Specification
MAGNESIUM III - (RM3) Specification
Compare
- HD Outdoor Ready
- Diecast Aluminum
- ALL Modules Compatible
- Side Locks
- Test Button
- Triangle Power Indicator
- Magnetic Led Modules
- Front / Back Service Led Modules
- Service Power Supply / Receiving
- Signal Power Connectors
- LCD Indicator
- M.U.S TechnologyMetric Unit System Technology
- No more AB Led Modules
- Led Calibration Data
- Full Front Maintenance
MECANUS
- YES
- Diecast Aluminum
- Yes, Except P2.97
- 3 x Sidelocks on 500x500mm
- YES
- YES
- YES
- YES
- ONLY from BACK
- Reunion, Seetronic, Nuetric
- NO
- YES
- NO AB ModulesAll Modules are the same, no left right modules. Although you need to change the protection lit.
- Calibration memory in Modules
- NO, only Modules
MAGNESIUM
- YES
- Diecast Magnesium
- Only Indoor Compatible
- 4 x Sidelocks on 500x1000mm
- YES (below LCD)
- YES
- Only Indoor
- Only Indoor
- ONLY from BACK
- Reunion, Seetronic, NuetricNuetric, Reunion, Seetronic Can be optional
- YES
- YES
- NO AB Modules
- Not Standard
- NO
Frequently Asked Question
MAGNESIUM is made of Magnesium material which is 1/3 the weight of Aluminum.
It is also made using DIECAST method. The panels are 500x1000mm which will also make the product a bit more economic compared to other rental series. Setup will be more fast and easy .
Yes, but also depends on the environment. If you use an RM2 Outdoor screen and put it indoor, you need to be sure that the environment temperature is not to high. Please also let us know how you would use the screen in fixed installations so we can consult you with the best solution possible.
Yes, depends where you put the screen. Please ask us for advice where you want to put the LED screen.
For indoor it is OK. For outdoor it depends of the location.
Standard the displays do not really need to used the connectors from outside. Since it got the function to connect the displays intern. With a turn button you can connect the displays. The displays are also suitable for using it with Reunion connectors which is a very stable and good brand which we have very good experience with. Also the pricing is much lower compared to Nuetric. Anyway it is possible to use , Nuetric One, Reunion, Seetronic or other connector as you wish.
But yes the display can perfectly use Nuetric Blue Indoor connectors and Nuetric Yellow Outdoor Connectors.
Yes, it is possible to put the light off the triangle it will only lit up if it detects the problem.
We tested the displays in an environment of 65degree when the display was max brightness and all leds on.
The product passed the test without any. The led display of RM2 series is mechanically cooled.
The power supply got an cool pad and use the aluminum mechanical door to cool it. The modules have special design. A mechanical labyrinth is added on the back of the modules so that the module can breath.
The difference between us and other company is that we also own a plastic moulding factory and manufacture our own plastic parts which means also the mask and the bottom plastic of the modules. The secret of small pitch outdoor all lies in this part. Tolerance is not accepted which means the parts must fit perfectly.
Another secret is that we have to
add a silicon layer getween the leds. This process needs a lot of experience and the right machinery to apply on.
If the silicon get a little bit higher the display will show ugly deformation
If the silicon get a little bit higher the display will show ugly deformation
Compared to some competition we all use a plastic mask so all thesilicon is hided below the mask. This will finnish the product and protect leds.
When we finish the display the uniformity is extremly important. Since it is an HD outdoor display people are getting very close to the display and will not accept deformation.
It might look very easy but it is actually quiet difficult to achieve.
It might look very easy but it is actually quiet difficult to achieve.
Another thing is the viewing angle which must be perfect 140x140 degrees.
All these together is the key to achieve an high quality displays which is the reason why competition without experience will fail to make it.
It took us many years to achieve and to be NR1 on the market for small pitch outdoor. And we finally achieved it for over 2 years still unbeatable and going even more far.
And the last thing is that we thank all the proffessional customers that helped us with their ideas to make this come true.
Yes the led modules are all compatible with eachother.
It is possible to buy the cabinets seperately and ship them by boat and ship the modules later on by air.
Which also give a solution for stocking the cabinets and having the led modules in about 2 weeks.
Be aware that if you use this solution you tell us about it. Since the cabinets needs a higher Watt of power supply so that works with all different kind of modules.
Another thing, it should be best that you buy OUTDOOR cabinets so it works indoor and outdoor to be waterproof.
It is possible to buy the cabinets seperately and ship them by boat and ship the modules later on by air.
Which also give a solution for stocking the cabinets and having the led modules in about 2 weeks.
Be aware that if you use this solution you tell us about it. Since the cabinets needs a higher Watt of power supply so that works with all different kind of modules.
Another thing, it should be best that you buy OUTDOOR cabinets so it works indoor and outdoor to be waterproof.
Ofcourse take in account when you use indoor modules on an outdoor cabinet it can not be used outdoor.
If you buy indoor cabinets it would not be a good idea to install outdoor modules on it.
If you buy indoor cabinets it would not be a good idea to install outdoor modules on it.
Modules are made from magnetic so very easy to install.
First of all easy to change the module. Which you can also get the module out from the back.
Optional front service is also possible but please update us when you want that solution.
What is also possible it when you separate the cabinet and module the customs tax can be lower since it will use another custom code. So it could be perfectly possible to address your company as manufacture of the display.
Yes, the RED, PURPLE, BLUE color on the back can be changed to a color that you prefer. Mostly we sell the FULL black with white power triangle. But the power triangle can also be black.