FORGOT YOUR DETAILS?

Standard Indoor Rental
P2.6, P3.2, P3.9, P4.8
Waterproof Outdoor Rental
P3.2, P3.9, P4.8, P6.25
High Brightness Indoor Rental
P2.6, P3.2, P3.9, P4.8, P6.25

Mecanus - RC Diecast Rental Series

This Series can also be used for fixed installation Solutions

MECANUS Hanging and Stacking Beam

Hanging, Stacking Beam one kind 2 solutions.

RC1 Indoor

Used for Indoor Rental
Also used for Fixed Installation
Full black SMD

  • P2.6, P3.2, P3.9, P4.8, P6.25
  • Magnetic Modules
  • Black Face SMD
  • No Fan Needed
  • High Contrast
  • Dust Proof
  • No Ghost Effect
  • High Uniformity
  • Big Viewing Angle
  • Fireproof Materials
  • Fast Repair
  • Fast Install
  • Extremely Flat

RC2 Outdoor

Used for Outdoor environment
Can also be used for indoor
High Brightness Waterproof

  • P3.2, P3.9, P4.8, P6.25
  • Magnetic Modules
  • UV Proof
  • No Fan Needed
  • High Brightness
  • Waterproof IP65
  • No Ghost Effect
  • High Uniformity
  • Big Viewing Angle
  • Fireproof Materials
  • Fast Repair
  • Fast Install
  • Extremely Flat

RC3 Indoor
High Brightness

Indoor where higher brightness is needed.
Can attract more attention to the display

  • P2.6, P3.2, P3.9, P4.8, P6.25
  • Magnetic Modules
  • UV Proof
  • No Fan Needed
  • High Brightness
  • Dust Proof
  • No Ghost Effect
  • High Uniformity
  • Big Viewing Angle
  • Fireproof Materials
  • Fast Repair
  • Fast Install
  • Extremely Flat

Your NR1 small pitch outdoor solution partner.

Rocketsign P3.2 is world`s outdoor smallest pitch This year will be the year of P3.9 OUTDOOR with TUV EMC certificate

RC series can be used for fixed installation and for rental solutions

EFFICIENTLY RE-ENGINEER
RC with NEW UPDATED

Less Heat - Mechanical Cooled without FAN
Magnetic Modules with calibration memory - front service
RC2 outdoor - IP65 front and back
Dual Receiving Card for

Mok KeithRocketsign
Check our new specification of the RC series. We improved all the necessary things so the customer does not even need to mention it. Our product pass EMC, TUV, ETL...

Industrial Professional Design

MECANUS I - (RC1) Specification



MECANUS II - (RC2) Specification



MECANUS III - (RC3) Specification



Side Lock

Strong Fast Sidelocks
5 seconds to install each lock
Adjustable for tolerance to remove gaps

Breathing Module

IP65 with Breathing for RC2
Handle for back service
Safety Cable for Magnetic Modules

Test Button

Test Button
Led inside Test Button for Signal
Test before install

Connector

IP65 Connector for RC2
Nuetric IP65 Connector
Reunion IP65 Connector

Power Indicator

Indicate Power
Can be switched off
White Led inside

Doorlock

2x Door Lock
Fast and Easy Maintenance
No screw needed to do maintenance

Compare

  • HD Outdoor Ready
  • Diecast Aluminum
  • ALL Modules Compatible
  • Side Locks
  • Test Button
  • Triangle Power Indicator
  • Magnetic Led Modules
  • Front / Back Service Led Modules
  • Service Power Supply / Receiving
  • Signal Power Connectors
  • LCD Indicator
  • M.U.S Technology
    Metric Unit System Technology
  • No more AB Led Modules
  • Led Calibration Data
  • Full Front Maintenance

MECANUS

  • YES
  • YES
  • YES
  • 3 x Sidelocks
  • YES
  • YES
  • YES
  • YES
  • ONLY from BACK
  • Reunion, Seetronic, Nuetric
  • NO
  • YES
  • NO AB Modules
    All Modules are the same, no left right modules. Although you need to change the protection lit.
  • Calibration memory in Modules
  • NO, only Modules

MAXIMUS

  • YES
  • YES
  • YES
  • 4 x Sidelocks
  • YES (below LCD)
  • Yes Intelligent Indicator
  • YES
  • YES
  • Front or Back
  • Internal Connector
    Nuetric, Reunion, Seetronic Can be optional
  • NO
  • YES
  • NO AB Modules
  • Calibration memory in Modules
  • YES

Frequently Asked Question

Yes, one of the biggest advantage of our HD outdoor screens is that a lot of customers are using the displays indoor and outdoor.  Because of the small pitch it can easily replace an indoor screen with high resolution for an outdoor screen. Also the high brightness can capture much more attention for the public.

Yes, but also depends on the environment. If you use an RC2 Outdoor screen and put it indoor,  you need to be sure that the environment temperature is not to high. Please also let us know how you would use the screen in fixed installations so we can consult you with the best solution possible.

Standard the displays are with Reunion connectors which is a very stable and good brand which we have very good experience with. Also the pricing is much lower compared to Nuetric. It is also possible to use Seetronic brand.

But yes the display can perfectly use Nuetric Blue Indoor connectors and Nuetric Yellow Outdoor Connectors.

Yes, there is a switch on the hub can put off the triangle light so it would not interfere.

We tested the displays in an environment of 65degree when the display was max brightness and all leds on.
The product passed the test without any. The led display of  RC2 series is mechanically cooled.

The power supply got an cool pad and use the aluminum mechanical door to cool it. The modules have special design. A mechanical labyrinth is added on the back of the modules so that the module can breath.

 

The difference between us and other company is that we also own a plastic moulding factory and manufacture our own plastic parts which means also the mask and the bottom plastic of the modules. The secret of small pitch outdoor all lies in this part. Tolerance is not accepted which means the parts must fit perfectly.

Another secret is that we have to

add a silicon layer getween the leds. This process needs a lot of experience and the right machinery to apply on.
If the silicon get a little bit higher the display will show ugly deformation
Compared to some competition we all use a plastic mask so all thesilicon is hided below the mask. This will finnish the product and protect leds.
When we finish the display the uniformity is extremly important. Since it is an HD outdoor display people are getting very close to the display and will not accept deformation.
It might look very easy but it is actually quiet difficult to achieve.
Another thing is the viewing angle which must be perfect 140x140 degrees.
All these together is the key to achieve an high quality displays which is the reason why competition without experience will fail to make it.
It took us many years to achieve and to be NR1 on the market for small pitch outdoor. And we finally achieved it for over 2 years still unbeatable and going even more far.
And the last thing is that we thank all the proffessional customers that helped us with their ideas to make this come true.

 

 

Yes the led modules are all compatible with eachother.
It is possible to buy the cabinets seperately and ship them by boat and ship the modules later on by air.
Which also give a solution for stocking the cabinets and having the led modules in about 2 weeks.
Be aware that if you use this solution you tell us about it. Since the cabinets needs a higher Watt of power supply so that works with all different kind of modules.
Another thing, it should be best that you buy OUTDOOR cabinets so it works indoor and outdoor to be waterproof.
Ofcourse take in account when you use indoor modules on an outdoor cabinet it can not be used outdoor.
If you buy indoor cabinets it would not be a good idea to install outdoor modules on it.
Modules are made from magnetic so very easy to install.

First of all easy to change the module. Which you can also get the module out from the back.
Optional front service is also possible but please update us when you want that solution.

What is also possible it when you separate the cabinet and module the customs tax can be lower since it will use another custom code.  So it could be perfectly possible to address your company as manufacture of the display.

 

 

Yes, the RED, PURPLE, BLUE color on the back can be changed to a color that you prefer. Mostly we sell the FULL black with  white power triangle. But the power triangle can also be black.

 

 

 

TOP